Order Products : sales@su-jiao.com

NuSil MED3-6311

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HQs1gv_NuSil-MED3-6311.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Comments: HIGH PURITY, HIGH STRENGTH

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.

Comments: HIGH PURITY, HIGH STRENGTH

General Information
Features	Biocompatible Breathable High Purity High Strength Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 3.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Penetration Depth ¹	3.00	mm

Uncured Properties	Nominal Value	Unit
Density	0.968	g/cm³
Viscosity	0.50	Pa·s
Curing Time (160°C)	3.5	hr

Note Message
1 .	Shaft weight/foot diameter/time : 12g/1in/5s

Resin Grade	Manufacturer	Category	Trademark
RTP 385 FR	RTP Company	PC	RTP
Geon™ Vinyl Rigid Extrusion 87717	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
Hanwha Total PP BI990	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP Impact Copolymer	Hanwha Total PP
Magnobond 111-047	Magnolia Plastics, Inc.	Epoxy	Magnobond
Plaslube® PA6/6 GF33 TS15	Techmer Engineered Solutions	Nylon 66	Plaslube®