Order Products : sales@su-jiao.com

Lusin® Alro OL 153 S

Category:	Silicone , Silicone
Manufacturer:	Chem-Trend L.P.
Trademark:	Lusin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HQi4hc_LusinAlroOL153S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Universal Silicone Release Agent for Processing Thermoplastic Resins and Elastomers Benefits Suitable for mould temperatures up to 150°C (302°F) easy and multiple demoulding wide range of application can also be used as a lubricant Description Lusin® Alro OL 153 S is an universal release agent for the demoulding of thermoplastic, thermoset and elastomeric parts up to a mould temperature of 150°C (302°F). It is also suitable as a lubricating agent with improved anti-friction properties. Lusin® Alro OL 153 S is based on non-reactive silicone oils which are absolutely colourless and have no smell. Typical Properties Appearance of the active ingredient : Liquid, colourless Application A fine even spray film should be applied to the clean mould; especially to edges and undercuts. For cleaning we recommend the use of Lusin® L 21 F as mould cleaning agent and Lusin® Clean L 11 or Lusin® Clean L 51 as degreasing agent. In terms of post treatment of the produced parts we do not recommend the use of Lusin® Alro OL 153 S. The high demoulding and wetting properties even in low concentrations will cause surface defects of the post treatment agent.

Message

Universal Silicone Release Agent for Processing Thermoplastic Resins and Elastomers

Benefits

Suitable for mould temperatures up to 150°C (302°F)

easy and multiple demoulding

wide range of application

can also be used as a lubricant

Description
Lusin® Alro OL 153 S is an universal release agent for the demoulding of thermoplastic, thermoset and elastomeric parts up to a mould temperature of 150°C (302°F). It is also suitable as a lubricating agent with improved anti-friction properties.

Lusin® Alro OL 153 S is based on non-reactive silicone oils which are absolutely colourless and have no smell.

Typical Properties
Appearance of the active ingredient : Liquid, colourless

Application
A fine even spray film should be applied to the clean mould; especially to edges and undercuts. For cleaning we recommend the use of Lusin® L 21 F as mould cleaning agent and Lusin® Clean L 11 or Lusin® Clean L 51 as degreasing agent.

In terms of post treatment of the produced parts we do not recommend the use of Lusin® Alro OL 153 S. The high demoulding and wetting properties even in low concentrations will cause surface defects of the post treatment agent.

General Information
Appearance	Colorless
Forms	Liquid

Resin Grade	Manufacturer	Category	Trademark
PONYL 4006G15	POLYROCKS CHEMICAL CO., LTD	Nylon 6	PONYL
Hostacom PPT 8027 103220	LyondellBasell Industries	PP Copolymer	Hostacom
Latilub 52/30-15T G/30	LATI S.p.A.	PP Homopolymer	Latilub
MTEGRITY™ HDPE HD800	M. Holland Company	HDPE	MTEGRITY™ HDPE
Sylvin 9925-68 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin