Order Products : sales@su-jiao.com
Nylfor® B2 K/30 NERO
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Nylfor® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HPM3UY_Nylfor-B2-K-30-NERO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% mineral filled polyamide 6, heat stabilized |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Molding Shrinkage | 1.0 | % | Internal Method |
| Water Absorption (23°C, 24 hr) | 6.5 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 75.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 7.0 | % | ASTM D638 |
| Flexural Modulus | 4300 | MPa | ASTM D790 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 260 | °C | |
| Middle Temperature | 270 | °C | |
| Front Temperature | 280 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Acrigel® ECL500 | Unigel Plásticos | Acrylic (PMMA) | Acrigel® |
| Cevian®-MAS MAS10, MAS10F | Daicel Polymer Ltd. | MMS | Cevian®-MAS |
| FLEXITEQ™ V78A010UV | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| Implex® Implex | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Implex® |
| Osterlene® MI-13-1.4 | Osterman & Company | PS (MIPS) | Osterlene® |
