Order Products : sales@su-jiao.com
Premier LD02329 - A
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HOVN96_Premier-LD02329---A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LD 02329 is a medium density polyethylene blown film grade with high stiffness and good clarity. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.929 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.3 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 310 | MPa | |
| TD | 379 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 24.1 | MPa | |
| TD : Break | 18.6 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 200 | % | |
| TD : Break | 550 | % | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 300 | g | |
| TD | 200 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 6.5 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymist® F5A EX | Solvay Specialty Polymers | PTFE | Polymist® |
| Texin® 950 U | Covestro - PUR | TPU-Polyether | Texin® |
| Ultra Low Outgassing™ SCV1-2596 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| Chemlon® 133 GH | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| OmniLon™ PA6 GR33 | OMNI Plastics, LLC | Nylon 6 | OmniLon™ |
