Order Products : sales@su-jiao.com
RTP 2800B-80A HF
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HKp6iH_RTP-2800B-80A-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 6.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 430 | % | ASTM D412 |
| Tear Strength 1 | 30.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 to 199 | °C | |
| Middle Temperature | 171 to 199 | °C | |
| Front Temperature | 171 to 199 | °C | |
| Mold Temperature | 16.0 to 66.0 | °C | |
| Injection Pressure | 83.0 to 124 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Flontech® FT-GL3-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Escorene™ Ultra UL 40028EM1 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| HANWHA LLDPE 3224 | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| HiFill® POM HO GF40 | Techmer Engineered Solutions | Acetal (POM) Homopolymer | HiFill® |
| IROCOAT® CA-151HT | Huntsman Corporation | TPU, Unspecified | IROCOAT® |
