Order Products : sales@su-jiao.com
Elastollan® 770 A 15 CS 000
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HHlY1c_Elastollan770A15CS000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic Polyester-Polyurethane with excellent mechanical properties and chemical resistance, outstanding wear resistance, good damping characteristic and high resilience performance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 70 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 50.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 27.0 | MPa | DIN 53504-S2 |
| Tensile Elongation (Break) | 650 | % | DIN 53504-S2 |
| Tear Strength 1 | 45 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 23 | % | ISO 815 |
| 70°C, 24 hr | 27 | % | ISO 815 |
| 100°C, 24 hr | 45 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70 - 90 | °C | |
| Drying Time | 4.0 - 5.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Hopper Temperature | 40 | °C | |
| Rear Temperature | 180 - 200 | °C | |
| Middle Temperature | 185 - 205 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Nozzle Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 30 - 50 | °C | |
| Injection Rate | Slow | ||
| Back Pressure | 5.00 - 15.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Method B, right-angle specimen (cut) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BONDYRAM® 1001 | Polyram Ram-On Industries | PP Homopolymer | BONDYRAM® |
| Clyrell EC2458 | LyondellBasell Industries | PP, Unspecified | Clyrell |
| DURAFIDE® 1130T6 | Polyplastics Co., Ltd. | PPS | DURAFIDE® |
| MAXATEL® AH100AVL5-NAT | Pier One Polymers, Inc. | Acetal (POM) Homopolymer | MAXATEL® |
| Styropek® BF 295M | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
