Order Products : sales@su-jiao.com
Borealis PP BB412E
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HGoG8t_Borealis-PP-BB412E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BB412E is a natural, medium molecular weight, medium melt flow rate polypropylene block copolymer with an optimal mechanical properties balance resulting in high stiffness and a very good impact strength both at room temperature and at low temperatures. The material is colored grey based on RAL 7032 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/5.0 kg | 2.5 | g/10 min | ISO 1133 |
| 230°C/2.16 kg | 1.3 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1300 | MPa | ISO 527-2 |
| Tensile Stress (Yield, Injection Molded) | 28.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 8.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 5.0 | kJ/m² | ISO 179/1eA |
| 23°C | 25 | kJ/m² | ISO 179/1eA |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 - 230 | °C | |
| Cylinder Zone 2 Temp. | 190 - 230 | °C | |
| Cylinder Zone 3 Temp. | 190 - 230 | °C | |
| Cylinder Zone 4 Temp. | 190 - 230 | °C | |
| Cylinder Zone 5 Temp. | 190 - 230 | °C | |
| Melt Temperature | 200 - 230 | °C | |
| Die Temperature | 200 - 230 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 200-230 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3880 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Stanyl® ForTii™ F31 | DSM Engineering Plastics | Nylon 4T | Stanyl® ForTii™ |
| FHR Polypropylene AP5206-HN | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| LIHAN® D9000 | Nanjing Lihan Chemical Co., Ltd. | Nylon 12 | LIHAN® |
| OTECH PVC OM5513-Boot | OTECH Corporation | PVC, Unspecified | OTECH PVC |
