Order Products : sales@su-jiao.com
BJB Polyurethane F-15 A/B
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | BJB Enterprises, Inc. |
| Trademark: | BJB Polyurethane |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HEpdro_BJB-Polyurethane-F-15-A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BJB Polyurethane F-15 A/B is a Polyurethane Thermoset Elastomer (TSU) material. It is available in North America. Important attributes of BJB Polyurethane F-15 A/B are:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Specific Gravity | |||
| Part A | 1.05 | ||
| Part B | 1.00 | ||
| Color | |||
| Part A | Pale Yellow | ||
| Part B | Amber |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Gel Time | 25.0 | min | |
| Work Time (25°C) 1 | 20.0 | min |
| Fill Analysis | Nominal Value | Unit | |
|---|---|---|---|
| Brookfield Viscosity | |||
| Mixed : 25°C | 1.15 | Pa·s | |
| Part A : 25°C | 3.70 | Pa·s | |
| Part B : 25°C | 0.250 | Pa·s |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.80 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 10 to 20 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 1.62 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Tear Strength | 4.20 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 45, Mix Ratio by Volume: 43 | ||
| Part B | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Demold Time (25°C) | 120 to 180 | min | |
| Post Cure Time (25°C) | 24 | hr |
| Note Message | |
|---|---|
| 1 . | 100 g mass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2256 | Covestro - Polycarbonates | PC | Makrolon® |
| CompaMid® PA 6 GF 10 M 20 | DimeLika Plast GmbH | Nylon 6 | CompaMid® |
| Geon™ Fiberloc™ 83510 | PolyOne Corporation | PVC, Rigid | Geon™ Fiberloc™ |
| EMOPLEN® CP-M 1815 R | EMAS Plastik San.Tic.AS. | PP Copolymer | EMOPLEN® |
| Paracril® 4880 | INSA | NBR | Paracril® |
