Order Products : sales@su-jiao.com
PRIMALLOY® A1610
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HE9mPB_PRIMALLOY-A1610.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® A1610 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of PRIMALLOY® A1610: Good Adhesion. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 0.70 | % | |
| Flow : 2.00 mm | 1.4 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 67 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 11.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 780 | % | ISO 37 |
| Compression Set 2(70°C, 22 hr) | 71 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| 2 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C 3510 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| DELPET™ 80NR-S | Asahi Kasei Chemicals Corporation | Acrylic (PMMA) | DELPET™ |
| ESTACARB 2060 V0 HF | Cossa Polimeri S.r.l. | PC | ESTACARB |
| Laser+® W 4000 (K42A) | DAK Americas LLC | PET | Laser+® |
| InnoPlus LL9641UP | PTT Global Chemical Public Company Limited | LLDPE | InnoPlus |
