Order Products : sales@su-jiao.com
Telcar® TL-1402G
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HBCkxM_Telcar-TL-1402G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Telcar®TL-1402G is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Telcar®The main features of the TL-1402G are:
Telcar®Typical application fields of TL-1402G are: electrical/electronic applications |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 53 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 4.27 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -51.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 | |
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Additional Information |
|---|
| 无卤阻燃TPE |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 177 | °C | |
| Middle Temperature | 177 - 182 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 188 - 193 | °C | |
| Processing (Melt) Temp | 188 - 193 | °C | |
| Mold Temperature | 25.0 - 65.6 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 166 - 182 | °C | |
| Cylinder Zone 2 Temp. | 171 - 188 | °C | |
| Cylinder Zone 3 Temp. | 185 - 193 | °C | |
| Cylinder Zone 5 Temp. | 193 - 199 | °C | |
| Die Temperature | 193 - 199 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1000 TFE 20 SI 5 | RTP Company | PBT | RTP |
| Next Nylon 66 Prime Series PGF25-01BL | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| Adflex X 500 F | LyondellBasell Industries | Polyolefin, Unspecified | Adflex |
| AVALON® 70 ABX | Huntsman Corporation | TPU-Polyester | AVALON® |
| Sylvin 3210-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
