Order Products : sales@su-jiao.com
TechnoFin PP T 10
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoFin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H8OIaq_TechnoFinPPT10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ranging from commodity to tailor-made compound |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (230°C/2.16 kg) | 40.0 | cm³/10min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 52.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1900 | MPa | ISO 527-2/1 |
| Tensile Stress | |||
| Yield | 30.0 | MPa | ISO 527-2/50 |
| Fracture | 31.0 | MPa | ISO 527-2/5 |
| Tensile Strain | |||
| Yield | 6.5 | % | ISO 527-2/50 |
| Fracture | 11 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 2120 | MPa | ISO 178 |
| Flexural Stress 2 | 45.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 1.4 | kJ/m² | ISO 179/1eA |
| 23°C | 2.3 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 18 | kJ/m² | ISO 179/1eU |
| 23°C | 35 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 113 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 64.0 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecolen® CP30 NL XA80 | Eurotec Engineering Plastics | PP Copolymer | Tecolen® |
| Novodur® E211 | Styrolution | ABS | Novodur® |
| ELASTOSIL® 7000 N | Wacker Chemie AG | Silicone | ELASTOSIL® |
| Pebax® MV 1074 SA 01 MED | Arkema | PEBA-Ether | Pebax® |
| TECHNYL® A 218 BLACK 21N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
