Order Products : sales@su-jiao.com
Sumikon® PM-6830 (Type: Black)
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H7YAb7_SumikonPM6830TypeBlack.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON® PM-683 (Type Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=4.5). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.84 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.080 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.11 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 55.0 | MPa | JIS K6911 |
| Flexural Strength | 85.0 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 9.4 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 300 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 12 | kV/mm | JIS K6911 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 9.0E+12 | ohms | JIS K6911 |
| -- 3 | 6.0E+11 | ohms | JIS K6911 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (4.5 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Method B (step by step) |
| 2 . | As molded |
| 3 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMIKASUPER® LCP E6807L | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| ADDINYL C2 ZV15 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| Glastic® SLC-1000 | Bulk Molding Compounds, Inc. | Polyester, TS | Glastic® |
| KUBE PIR 22378 | KUBE Electronics AG | HDPE | KUBE PIR |
| MAJORIS G309 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
