Order Products : sales@su-jiao.com
Filter-bond™ R-30-6-2
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H6r4oE_Filter-bond-R-30-6-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond R-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. The FILTER-bond R-30-6 Series feature 3 potting and adhesive systems specifically designed for potting and/or bonding Ultrafiltration products. The FILTER-bond R-30-6 Series DO NOT CONTAIN AROMATIC AMINES or other carcinogenic or mutenogenic materials. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.15 to 0.25 | % | ASTM D2566 |
| Weight - per cubic inch | 18 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 161 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time (25°C) 1 | 30.0 to 40.0 | min | ASTM D2971 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time | Internal Method | ||
| 21°C | 12.0 to 18.0 | hr | |
| 80°C | 6.0 to 12.0 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 to 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2900 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 88.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.5 | % | ASTM D638 |
| Flexural Modulus | 3110 | MPa | ASTM D790 |
| Flexural Strength | 107 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 15 | J/m | ASTM D256 |
| Unnotched Izod Impact | 27 | J/m | ASTM D256 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 22, Mix Ratio by Volume: 25 | ||
| Thermoset Mix Viscosity (25°C) | 6000 to 11000 | cP | ASTM D4878 |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 CR30 BK111 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Sinvicomp SBB3615 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Witcom POM-C 4G/3L1 | Witcom Engineering Plastics B.V. | Acetal (POM) Copolymer | Witcom POM-C |
| AKROTEK® PK-VM natural (4774) | AKRO-PLASTIC GmbH | PK-Aliphatic | AKROTEK® |
| Comai 209-1 NT | Comai Ltda | PP Copolymer | Comai |
