Order Products : sales@su-jiao.com
RABALON® T331C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | RABALON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H6Q8AY_RABALON-T331C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RABALON® T331C is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of RABALON® T331C: Low Hardness. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.70 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 24 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.300 | MPa | ISO 37 |
| Tensile Stress (Break) | 3.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 700 | % | ISO 37 |
| Tear Strength | 16 | kN/m | ISO 34-1 |
| Compression Set 1(70°C, 22 hr) | 34 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-fax PD702NW | LyondellBasell Industries | PP Homopolymer | Pro-fax |
| VITAMIDE® BY16 | A. Schulman Europe | Nylon 6 | VITAMIDE® |
| NEXUS PE LLDPE-10029 | Nexus Resin Group, LLC. | LLDPE | NEXUS PE |
| Acculam™ Epoxyglas G10 nonFR | Accurate Plastics, Inc. | Epoxy | Acculam™ |
| INSPIRE™ TF1301 | Trinseo | PP, Unspecified | INSPIRE™ |
