Order Products : sales@su-jiao.com
Osterlene® LD-2-921
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H2bCRv_Osterlene-LD-2-921.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LD-2-921 is a series of homopolymer resins for blown film. Applications include stiff liners. LD-2-921 exhibits good processability and clarity. LD-2-921 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 11.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 1% Secant, MD | 193 | MPa | ASTM D882 |
| Tensile Strength - MD (Yield) | 23.4 | MPa | ASTM D882 |
| Tensile Elongation - MD (Yield) | 300 | % | ASTM D882 |
| Dart Drop Impact 1 | 90 | g | ASTM D1709 |
| Elmendorf Tear Strength - MD | 380 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 70 | ASTM D2457 | |
| Haze | 6.0 | % | ASTM D1003 |
| Additional Information |
|---|
| The value shown as Secant Modulus, ASTM D882, was tested in accordance with ASTM E111.Product LD-2-921-SMAM: Slip - Medium, Antiblock -MediumProduct LD-2-921-AM: Slip - 0, Antiblock - MediumProduct LD-2-921: Slip - 0, Antiblock - 0 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong Nylon A1L04 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon, Unspecified | Shandong Nylon |
| Wellamid® MRT1487 BK | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Tritan™ MX730 | Eastman Chemical Company | Copolyester | Tritan™ |
| NEFTEKHIM PE 5117P (18602) | Nizhnekamskneftekhim Inc. | LLDPE | NEFTEKHIM PE |
| PEXTIN™ PBTM30-BK10 | Pier One Polymers, Inc. | PBT | PEXTIN™ |
