Order Products : sales@su-jiao.com

HM10® Max

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Heritage Plastics, Inc.
Trademark:	HM10®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Gzri87_HM10-Max.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
This concentrate was specially formulated to maintain the cost and performance balance and can be used in a broad range of applications such as blown film, thermoformed sheet, and injection molding. Suitable Applications: blown film thermoformed sheet injection molding blow molding raffia Environmentally Beneficial Calcium carbonate is a plentiful, natural mineral and can be used to effectively displace a signifi- cant portion of the petrochemical based compo- nent in the targeted application. The improved productivity and the lower energy consumption awarded by using our concentrates all help to minimize the carbon footprint of the end product. Regulatory Compliance The ingredients in our concentrates are approved for use in direct food contact packaging and are heavy metals free making them compliant with regulations such as California Proposition 65 and CONEG.

Message

This concentrate was specially formulated to maintain the cost and performance balance and can be used in a broad range of applications such as blown film, thermoformed sheet, and injection molding.

Suitable Applications:
blown film
thermoformed sheet
injection molding
blow molding
raffia

Environmentally Beneficial
Calcium carbonate is a plentiful, natural mineral and can be used to effectively displace a signifi- cant portion of the petrochemical based compo- nent in the targeted application. The improved productivity and the lower energy consumption awarded by using our concentrates all help to minimize the carbon footprint of the end product.

Regulatory Compliance
The ingredients in our concentrates are approved for use in direct food contact packaging and are heavy metals free making them compliant with regulations such as California Proposition 65 and CONEG.

General Information
Filler / Reinforcement	Calcium Carbonate, 81% Filler by Weight
Features	Food Contact Acceptable
Uses	Film Sheet
Processing Method	Blow Molding Blown Film Injection Molding Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	1.95	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238
Moisture	< 1000	ppm	ASTM D6980

Resin Grade	Manufacturer	Category	Trademark
alphalon™ E 36 L	Grupa Azoty ATT Polymers GmbH	Nylon 6	alphalon™
Fluoraz 797	Greene, Tweed & Co.	PTFE	Fluoraz
Plaslube® AC-80/TF/22	Techmer Engineered Solutions	Acetal (POM) Copolymer	Plaslube®
Daelim Po1y® XP3300EN	DAELIM INDUSTRIAL CO., LTD.	mLLDPE	Daelim Po1y®
Sylvin 9766-90 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin