Order Products : sales@su-jiao.com
ADDINYL PMD 20143
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | ADDIPLAST |
| Trademark: | ADDINYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GyzV9q_ADDINYL-PMD-20143.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADDINYL PMD 20143 is a Polyamide 6 (Nylon 6) material. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Primary attribute of ADDINYL PMD 20143: Impact Resistant. Typical application of ADDINYL PMD 20143: Automotive |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.11 | -- | g/cm³ | ISO 1183/A |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Shore Hardness (Shore D) | 79 | 71 | ISO 868 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress (Yield) | 60.0 | 35.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 50 | 50 | % | ISO 527-2 |
| Flexural Modulus | 2100 | 700 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 15 | 40 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | No Break | ISO 179/1eU | |
| Notched Izod Impact Strength | 15 kJ/m² | No Break | ISO 180/1A |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 70.0 | -- | °C | ISO 75-2/Af |
| Melting Temperature (DSC) | 220 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (Solution A) | 600 | -- | V | IEC 60112 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200D AR 15 TFE 5 | RTP Company | Nylon 612 | RTP |
| UBESTA 3030 XA | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| TYNEC® CG100 | Tyne Plastics LLC. | PC | TYNEC® |
| Abstron IMC45 | Bhansali Engineering Polymers Limited | PC+ABS | Abstron |
| CELEX™ 5200HF.IM | Trinseo | PC+ABS | CELEX™ |
