Order Products : sales@su-jiao.com
KYDEX® FST-03
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | SEKISUI Polymer Innovations, LLC |
| Trademark: | KYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gy66Xi_KYDEX-FST-03.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KYDEX® FST03 is a high performance thermoplastic sheet specifically formulated to meet all Boeing and Airbus toxicity requirements for aircraft interior components. Its integral pearlescence adds a new dimension to aviation interior design. KYDEX® FST03 meets the flammability, smoke development, and heat release requirements set forth in Federal Aviation Regulations (FAR) 25.853 paragraphs (a) and (d) as well as the toxicity requirements for Airbus (ABD0031) and Boeing (BSS7239). Its excellent thermoforming characteristics make it an ideal material for three-dimensional components where pearlescent design effects are desirable. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (3.18 mm) | 2390 | MPa | ASTM D638 |
| Tensile Strength (3.18 mm) | 74.5 | MPa | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2450 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 101 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 3.18 mm) | 125 | °C | ASTM D648 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Toxic gas emission 1 | Pass | ||
| Flammability | |||
| NBS Smoke Density 2 | FAR 25.853(d) | ||
| OSU Heat Release, Peak 3 | kW/m² | FAR 25.853(d) | |
| OSU Heat Release, Total 4 | kW·min/m² | FAR 25.853(d) | |
| Vertical Burn, 12 Second | Pass | FAR 25.853(a) | |
| Vertical Burn, 60 Second | Pass | FAR 25.853(a) |
| Additional Information |
|---|
| Pre-drying of KYDEX® FST03 is required prior to thermoforming in order to remove moisture from the sheet |
| Note Message | |
|---|---|
| 1 . | ABD0031, BSS 7239 |
| 2 . | Part V |
| 3 . | Part IV |
| 4 . | Part IV |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2399C X 68917 A | RTP Company | TPU, Unspecified | RTP |
| Caltex PP MT64WS | GS Caltex | PP, Unspecified | Caltex PP |
| Evatane® 28-25 | Arkema | EVA | Evatane® |
| Forprene® 6NM001A60 | SO.F.TER. SPA | TPV | Forprene® |
| Sylvin 9077-80 Grey 9438 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
