Order Products : sales@su-jiao.com
Moplen HP562S
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GxgxCW_Moplen-HP562S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen HP562S is the controlled rheology polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP562S is a homopolymer particularly suitable for spunbonded nonwovens. Moplen HP562S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 34 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 37.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1470 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 100 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Styrolution PS 158N/L | INEOS Styrolution Group GmbH | PS (GPPS) | Styrolution PS |
| TOLEN H352 IM | SIBUR, LLC | PP Homopolymer | TOLEN |
| GTPO™ 8101 | S&E Specialty Polymers, LLC | TPO (POE) | GTPO™ |
| LNP™ STAT-KON™ EEF42 compound | SABIC Innovative Plastics | PEI | LNP™ STAT-KON™ |
| LNP™ LUBRICOMP™ LL004C compound | SABIC Innovative Plastics | PEEK | LNP™ LUBRICOMP™ |
