Order Products : sales@su-jiao.com
CarbonResin RPU 61
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Carbon3D, Inc. |
| Trademark: | CarbonResin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GxMwBY_CarbonResinRPU61.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density 1 | 1.01 - 1.02 | g/cm³ | |
| Viscosity (25°C) | 5.50 - 6.50 | Pa·s |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1400 - 1600 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 38.0 - 42.0 | MPa | ASTM D638 |
| Fracture | 39.0 - 45.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 5.0 - 7.0 | % | ASTM D638 |
| Fracture | 110 - 130 | % | ASTM D638 |
| Flexural Modulus | 1000 - 1200 | MPa | ASTM D790 |
| Flexural Strength | 35.0 - 39.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 2 | 1.8 - 2.6 | kJ/m² | ISO 179 |
| Notched Izod Impact 3 | 25 - 29 | J/m | ASTM D256 |
| Unnotched Izod Impact | 1000 - 1400 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 59.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 48.0 | °C | ASTM D648 |
| Glass Transition Temperature | DMA | ||
| -- 4 | 53.0 | °C | DMA |
| -- 5 | 98.0 | °C | DMA |
| CLTE - Flow | 6.6E-5 | cm/cm/°C | ASTM E228 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 3.10 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.017 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | Liquid |
| 2 . | Machined Notch |
| 3 . | Machined Notch |
| 4 . | E' |
| 5 . | tan(d) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTOSINT® 1184 white | Evonik Industries AG | Nylon 12 | VESTOSINT® |
| Amodel® AS-1935 HS | Solvay Specialty Polymers | PPA | Amodel® |
| EMERGE™ PC 8310-22 | Trinseo | PC | EMERGE™ |
| LUVOCOM® TPI-0953 | Lehmann & Voss & Co. | PI, TP | LUVOCOM® |
| ESTOPLAST XU 6435BB11 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
