Order Products : sales@su-jiao.com
MARPOL® HDM 510
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gx5cME_MARPOL-HDM-510.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MARPOL® HDM 510 exhibits excellent stiffness for thin walled applications, improved stack strength and low viscosity for exceptional processing with shorter cycle times. This resin's superior physical properties provide impact resistance for demanding applications and low warpage for improved part quality and reliability. Recommended Applications: Crates, pallets, pails and totes |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.962 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 33.0 | MPa | |
| Break | 15.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.0 | % | |
| Break | 100 | % | |
| Flexural Modulus - 1% Secant | 1700 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 131 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 A 2025/109 GF25 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| DAI-EL™ G-701HBP | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Daplen™ EF007AEB | Borealis AG | TPO | Daplen™ |
| ExxonMobil™ PP1024E4 | ExxonMobil Chemical | PP Homopolymer | ExxonMobil™ |
| KARINTOX 70/6 | Karina Ind. e Com. de Plásticos Ltda | Polyolefin, Unspecified | KARINTOX |
