Order Products : sales@su-jiao.com

PRIMALENE WPP702Z

Category:	HDPE , High Density Polyethylene
Manufacturer:	Southern Polymer, Inc.
Trademark:	PRIMALENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Gv6hr4_PRIMALENE-WPP702Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A blow molding grade high density polyethylene

Applications:

Injection blow molding

Features:

Zinc stearate

Excellent stiffness

Exceptional processability

FDA 21 CFR 177.1520 (c) 3.1 & 3.2a

General Information
Additive	Mold Release 2
Features	Food Contact Acceptable Good Processability Good Stiffness High Density
Uses	Food Service Applications Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1 FDA 21 CFR 177.1520(c) 3.2a
Processing Method	Blow Molding Injection Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.955	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.35	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)	35.0	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	27.6	MPa	ASTM D638
Tensile Elongation ²(Break)	600	%	ASTM D638
Flexural Modulus - Tangent	1450	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746

Note Message
1 .	51 mm/min
2 .	51 mm/min

Resin Grade	Manufacturer	Category	Trademark
Borcom™ WE007AE	Borealis AG	PP, Unspecified	Borcom™
Etinox® EA-4130	Ercros, S.A.	PVC, Rigid	Etinox®
DELPET™ 80NE	Asahi Kasei Chemicals Corporation	Acrylic (PMMA)	DELPET™
JSR EPR EBM3021P	JSR Corporation	EPDM	JSR EPR
ALCOM® POM 770/1 SLDS	ALBIS PLASTIC GmbH	Acetal (POM) Copolymer	ALCOM® POM