Order Products : sales@su-jiao.com
RTP 6003-75A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GunY6K_RTP-6003-75A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bondable to PC/PMMA, PC/PBT |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.3 | % | ASTM D955 |
| Moisture Content | 0.040 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength 1 | |||
| PC/PBT | > 6.1 | kN/m | |
| PC/PMMA | > 6.1 | kN/m |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 3.10 | MPa | ASTM D412 |
| 100% strain | 3.45 | MPa | ASTM D412 |
| 300% strain | 4.83 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 850 | % | ASTM D412 |
| Tear Strength 2 | 43.8 | kN/m | ASTM D624 |
| Compression Set 3 | ASTM D395B | ||
| 23°C, 22 hr | 23 | % | ASTM D395B |
| 70°C, 22 hr | 65 | % | ASTM D395B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Pressure | 34.5 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | 90°, 20 in/min, RTP 55, Overmold Failure |
| 2 . | C mould |
| 3 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® RM 8114 | Teknor Apex Company | PVC, Rigid | APEX® |
| Capilene® SU 75 AV | Carmel Olefins Ltd. | PP Impact Copolymer | Capilene® |
| Chemraz 562 | Greene, Tweed & Co. | Perfluoroelastomer | Chemraz |
| DAI-EL™ G-7200BP | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Sylvin 8250-80 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
