Order Products : sales@su-jiao.com
Generic PP Copolymer - Unspecified
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GuZyxZ_Generic-PP-Copolymer---Unspecified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Copolymer - Unspecified This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 - 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.8 - 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.35 - 1.3 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3670 | MPa | ISO 527-2 1 |
| Tensile Strength | |||
| Yield, 23°C | 16.5 - 50.8 | MPa | ASTM D638 |
| Yield | 31.6 | MPa | ISO 527-2 2 |
| Tensile Strain (Yield) | 3.8 | % | ISO 527-2 3 |
| Tensile Elongation at Break | 7.2 - 50 | % | ISO 527-2 4 |
| Flexural Modulus (23°C) | 1700 - 3110 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy impact strength (23°C) | 44.5 | kJ/m² | ISO 179/1eU 5 |
| Notched Izod Impact (23°C) | 64 - 92 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 33.0 - 33.4 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP Copolymer - UnspecifiedThis information is provided for comparative purposes only. |
| Note Message | |
|---|---|
| 1 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 2 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 3 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 4 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| 5 . | ??????,?? ISO 10350 ??? 23°C/50%r.h. ??? |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 527K | Saudi Basic Industries Corporation (SABIC) | PP Homopolymer | SABIC® PP |
| Ryton® V-1 | Solvay Specialty Polymers | PPS | Ryton® |
| RheTech Polypropylene HP531-678UV | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| Grilamid® XE 4108 nat | EMS-GRIVORY | Nylon 6/12 | Grilamid® |
| 3M™ Dyneon™ PTFE TF 2053Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
