Order Products : sales@su-jiao.com

NuSil CV1-2289-1

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Gtshtc_NuSil-CV1-2289-1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Primed Lap Shear 450 psi (3.1 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Primed Lap Shear 450 psi (3.1 MPa)

General Information
Features	Low to No Outgassing
Uses	Adhesives Aerospace Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	White
Density	1.10	g/cm³
Viscosity
-- ¹	40	Pa·s
-- ²	65	Pa·s
Curing Time (150°C)	0.25	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Lap Shear Strength ³	3.10	MPa
Tensile Strength	5.17	MPa
Tensile Elongation at Break	350	%

Note Message
1 .	Part B
2 .	Part A
3 .	Primed with CF1-135

Resin Grade	Manufacturer	Category	Trademark
Rhelon G1730H-01	RheTech, Inc.	Nylon 6	Rhelon
Akulon® Ultraflow K-FKGS6 /B	DSM Engineering Plastics	Nylon 6	Akulon® Ultraflow
EVALENE® PP PHF0702	JG Summit Petrochemical Corporation	PP Homopolymer	EVALENE® PP
Exact™ 9061	ExxonMobil Chemical	Plastomer	Exact™
Plaslube® PP GF30 TL15	Techmer Engineered Solutions	PP, Unspecified	Plaslube®