Order Products : sales@su-jiao.com

Trithene® JX 7300

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Petroquimica Triunfo
Trademark:	Trithene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GtRaDC_Trithene-JX-7300.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Trithene®JX 7300 is a low density polyethylene material,. This product is available in Latin America and is processed by injection molding.

Trithene®The main features of JX 7300 are:

accessible food

Rapid Prototyping Cycle

Good flexibility

Typical application areas include:

engineering/industrial accessories

Consumer goods

food contact applications

General Information
Features	Fast molding cycle Good flexibility Compliance of Food Exposure
Uses	Thin wall parts Toys
Agency Ratings	ANVISA n°105/99 ASTM D 1248, I, Class A, Cat. 1 FDA 21 CFR 177.1520(c) 2.1
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.917	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	30	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield, molding	9.00	MPa	ASTM D638
Fracture, molding	7.00	MPa	ASTM D638
Tensile Elongation (Break, Compression Molded)	120	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	78.0	°C	ASTM D1525
Melting Temperature	108	°C

Additional Information
Melt Mass-Flow Rate, ASTM D1238, 190°C/2.16 kg: 25 to 35 g/10 minDensity, ASTM D1505: 0.915 to 0.919 g/cm³

Injection	Nominal Value	Unit
Rear Temperature	150 - 170	°C
Middle Temperature	170 - 210	°C
Mold Temperature	25.0 - 45.0	°C

Resin Grade	Manufacturer	Category	Trademark
PRL PC-G40-(color)-1	Polymer Resources Ltd.	PC	PRL
MORETEC™ 0358CN	Prime Polymer Co., Ltd.	LLDPE	MORETEC™
NOVAREX® 7030R	Mitsubishi Engineering-Plastics Corp	PC	NOVAREX®
4MID® 9A22115 HR	4Plas	Nylon 66	4MID®
Braskem PE HS5608	Braskem	HDPE	Braskem PE