Order Products : sales@su-jiao.com
DOW™ VLDPE DFDA-1010 NT 7
| Category: | VLDPE , Very Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ VLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GsKZzw_DOW-VLDPE-DFDA-1010-NT-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
DFDA-1010 NT 7 Very Low Density Polyethylene (VLDPE) Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance toughness of the structure. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.906 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.85 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 1 sec | 91 | ASTM D2240 | |
| Shaw A, 5 seconds | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 23.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 152 | MPa | ASTM D790A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -38.9 | °C | Internal method |
| Melting Temperature (DSC) | 119 | °C | Internal method |
| Additional Information |
|---|
| 根据 ASTM D 4976 进行基板模制和测试。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ROMPETROL PP XCI-25 | ROMPETROL PETROCHEMICALS S.R.L. | PP Impact Copolymer | ROMPETROL PP |
| Promyde® B30 P2 G30 | NUREL, S.A. | Nylon 6 | Promyde® |
| Sinvicomp SSF4265UV | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| 4MID® 9B23300 X | 4Plas | Nylon 6 | 4MID® |
| ULTEM™ 2310 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
