Order Products : sales@su-jiao.com
Latamid 12 H 90FE03
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latamid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GqlGgp_Latamid12H90FE03.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyamide 12 (PA12) based compound. Heat stabilised. Magnetizable filler. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 4.50 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Transverse flow : 2.00mm | 0.60 - 0.80 | % | ISO 294-4 |
| Flow : 2.00mm | 0.60 - 0.80 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.040 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 13500 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 40.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 0.60 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 1.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 8.0 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 150 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 95.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 160 | °C | ISO 306/B50 |
| Note Message | |
|---|---|
| 1 . | 60 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trithene® TS 4016 | Petroquimica Triunfo | LDPE+LLDPE | Trithene® |
| Kepital® F20-02 | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
| INEOS HDPE B53-35H-100 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| LUVOCOM® 1301-7470 | Lehmann & Voss & Co. | PPS, Linear | LUVOCOM® |
| Dynalloy™ GP 7830-60N | PolyOne Corporation | TPE | Dynalloy™ |
