Order Products : sales@su-jiao.com
Braskem PE PB-608
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GqIx41_Braskem-PE-PB-608.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: PB608 is a grade produced under high pressure in an autoclave reactor. This grade is especially designed for injection molding of articles that must show excellent flexibility properties and very good flow ability. Additive: No additives present. Applications: Masterbatches; Covers and injected parts with large flat area. Process: Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 10% Igepal, Compression Molded, F50) | 15.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 39 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 8.00 | MPa | |
| Break, Compression Molded | 8.00 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 390 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 450 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 79.0 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 210 | °C | |
| Mold Temperature | 5.00 to 25.0 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nycal™ 2134R33H Bk-1 | Technical Polymers, LLC | Nylon 66 | Nycal™ |
| Beamset 261 | Arakawa Chemical Industries, Ltd. | Acrylic, Unspecified | Beamset |
| Andur 9500 AP | Anderson Development Company | PUR-Ether/TDI | Andur |
| CP PRYME® PC/ABS PCA300 | Chase Plastics Services Inc. | PC+ABS | CP PRYME® PC/ABS |
| LNP™ LUBRICOMP™ Lexan_LF0335 compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
