Order Products : sales@su-jiao.com
Plasmer 5090N/1002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Plasmer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Go4Kb5_Plasmer-5090N-1002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wide service temperature range, resistance, compression set, recyclable |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/7.06 kg) | 26 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.79 | MPa | ASTM D412 |
| Tensile Strength (Break) | 18.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 770 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxiglas® MG555 | Maxiglas Corporation | Acrylic (PMMA) | Maxiglas® |
| APEX® 65007 | Teknor Apex Company | PVC, Flexible | APEX® |
| LubriOne™ GF-1010 40 MS 2 HS Black 37 | PolyOne Corporation | Nylon 6 | LubriOne™ |
| Plaslube® PA6 TL10 | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
| Jam HM9450F (EX5) | Jam Petrochemical Company | HDPE | Jam |
