Order Products : sales@su-jiao.com

Ultra Low Outgassing™ SCV2-2599

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	Ultra Low Outgassing™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Gn8fl5_Ultra-Low-Outgassing-SCV2-2599.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.64 W/m-K

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 0.64 W/m-K

General Information
Features	Low to No Outgassing
Uses	Aerospace Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	0.64	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 20
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	140	g/min

Uncured Properties	Nominal Value	Unit
Color	White
Curing Time (150°C)	0.50	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	55
Tensile Strength	2.76	MPa
Tensile Elongation at Break	230	%
Tear Strength	9.63	kN/m

Resin Grade	Manufacturer	Category	Trademark
Quadraflex™ ALE-90A-B30	Biomerics, LLC	TPU-Polyether	Quadraflex™
VITAMIDE® AY36BK8513	Jackdaw Polymers	Nylon 66	VITAMIDE®
NYCOA Polyamide 2061	Nycoa (Nylon Corporation of America)	Nylon 66/6	NYCOA Polyamide
HiFill® PA4/6 CF40 HS	Techmer Engineered Solutions	Nylon 46	HiFill®
LUVOCOM® 1301-8596	Lehmann & Voss & Co.	PPS	LUVOCOM®