Order Products : sales@su-jiao.com
Epolene® C-13P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GmsL7O_Epolene-C-13P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene C-13P is a branched low density polyethylene homopolymer powder with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with Epolene C-13P exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat seal ability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 190 | g/10 min | |
| Molecular Weight 1 | 76000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 110 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 300 | mm | ASTM D5 |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rigidex® HD6070FA | INEOS Olefins & Polymers Europe | HDPE | Rigidex® |
| Vi-Chem PVC V142-80 | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| Alathon® XL3805 | LyondellBasell Industries | MDPE | Alathon® |
| DINAPLEN® PPH1S15 G30 | Grupo Repol | PP Homopolymer | DINAPLEN® |
| PALMID® R 6 S GF 10 MV 20 | pal plast GmbH | Nylon 6 | PALMID® |
