Order Products : sales@su-jiao.com
CERTENE™ PBM-12
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GlOZY4_CERTENE-PBM-12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-12 is a certified prime grade Medium-Impact INJECTION MOLDING specially designed for applications requiring good impact resistance at low temperatures. PBM-12 features very good processability, medium-high flow for fast mold filling, very good dimensional stability, excellent heat resistance, and optimal balance of mechanical properties. PBM-12 typical applications include automotive parts and interior trimming, appliance parts, tackle boxes, gun and tool cases, toys, industrial components, caps, closures and housewares. Recommended processing temperature is between 210° - 220°C. PBM-12 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and with most international regulations concerning the use of Polypropylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 13 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 2 | 1020 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 3(23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 4(0.45 MPa, Unannealed) | 85.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 140 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Test made on injection molded Type 1 tension test specimen according to ASTM D 2146. |
| 2 . | 1.3 mm/min |
| 3 . | Test made on injection molded Type 1 tension test specimen according to ASTM D 2146. |
| 4 . | Test made on injection molded Type 1 tension test specimen according to ASTM D 2146. |
| 5 . | Test made on injection molded Type 1 tension test specimen according to ASTM D 2146. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB70 GR10 NL100 | Eurotec Engineering Plastics | PBT | Tecodur® |
| VECTRA® MT1305 | Celanese Corporation | LCP | VECTRA® |
| BIOPLAST® GF 106/02 | BIOTEC GmbH & Co. KG | TP, Unspecified | BIOPLAST® |
| Gallonprene® GP410-5003 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP™ STAT-KON™ EX11402 compound | SABIC Innovative Plastics | PEI | LNP™ STAT-KON™ |
