Order Products : sales@su-jiao.com
Jam PE 23507
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GlOUyy_Jam-PE-23507.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 23507 is a Linear Low Density Polyethylene product. It can be processed by extrusion coating and is available in Africa & Middle East. Typical application: Coating Applications. Primary characteristic: butene comonomer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 15.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 40 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SNOLEN® IM 59/64 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| Cri-Line LC-612 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| ELASTOSIL® LR 3841/50 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| LUVOCOM® 3-7234-1 | Lehmann & Voss & Co. | Nylon 6 | LUVOCOM® |
| Plaslube® PC / ABS 88 GF10 | Techmer Engineered Solutions | PC+ABS | Plaslube® |
