Order Products : sales@su-jiao.com

KPOL-LDPE LD K-1.40/920

Category:	LDPE , Low Density Polyethylene
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Gl4Duf_KPOL-LDPE-LD-K-1-40-920.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Low Density Polyethylene Excellent Processability

Characteristics

KPOL Chem LD K- 1.40/922 is a low density polyethylene (LDPE) resin used in a wide range of processing methods such as injection molding, blow moulding and film extrusion. It exhibits very good softness and toughness and good dimensional stability. Is delivered in pellet form and is not additivated .

Applications

Typical customer applications include products with good mechanical properties and high flexibility : Blow Moulding Applications, Bottles For Consumer Goods, Caps & Closures, Sports, Leisure, Toys and lids and champagne corks.

General Information
Additive	Antioxidant
Features	Antioxidant Good Dimensional Stability Good Flexibility Good Processability Good Toughness Soft
Uses	Bottles Caps Closures Lids Sporting Goods Toys
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Blow Molding Extrusion Film Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.4	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	46		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	13.0	MPa
Break	16.0	MPa

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	88.0	°C	ASTM D1525 ¹

Note Message
1 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Melthene® -H 900B (Black)	TOSOH Corporation	EVA	Melthene® -H
Nipol® 1042	Zeon Chemicals L.P.	NBR	Nipol®
4MID® 9B21730 H	4Plas	Nylon 6	4MID®
Acrigel® ECL	Unigel Plásticos	Acrylic (PMMA)	Acrigel®
Greenflex® MP 35 F	Versalis S.p.A.	EVA	Greenflex®