Order Products : sales@su-jiao.com
Alkatuff® 438
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkatuff® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GkSVge_Alkatuff-438.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
438 is a hexene copolymer linear low density polyethylene, designed for a variety of general purpose applications. 438 is formulated with process aid and a stabilisation package but contains no slip of antiblock additives. 438 is intended for general purpose blending applications such as film for liners. 438 is not recommended for use in outdoor applications (especially applications where there may be prolonged exposure to sunlight, eg. agricultural films) without the addition of appropriate Hindered Amine based Light Stabilisers (HALS). 438 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c), item 3.1. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 0.50 0.50 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 50 | µm | |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 25 µm | 190 | MPa | ASTM D882 |
| 2% secant, MD : 50 µm | 200 | MPa | ASTM D882 |
| 2% secant, TD : 25 µm | 200 | MPa | ASTM D882 |
| 2% secant, TD : 50 µm | 230 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 9.00 | MPa | ASTM D882 |
| MD : Yield, 50 µm | 10.0 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 11.0 | MPa | ASTM D882 |
| TD : Yield, 50 µm | 12.0 | MPa | ASTM D882 |
| MD : Break, 25 µm | 47.0 | MPa | ASTM D882 |
| MD : Break, 50 µm | 46.0 | MPa | ASTM D882 |
| TD : Break, 25 µm | 41.0 | MPa | ASTM D882 |
| TD : Break, 50 µm | 42.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 900 | % | ASTM D882 |
| MD : Break, 50 µm | 1100 | % | ASTM D882 |
| TD : Break, 25 µm | 1000 | % | ASTM D882 |
| TD : Break, 50 µm | 1100 | % | ASTM D882 |
| Dart Drop Impact | ASTM D1709 | ||
| 25 µm, blown film | 160 | g | ASTM D1709 |
| 50 µm, blown film | 260 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 290 | g | ASTM D1922 |
| MD : 50 µm | 670 | g | ASTM D1922 |
| TD : 25 µm | 510 | g | ASTM D1922 |
| TD : 50 µm | 1100 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | ASTM D2457 | ||
| 25.0 µm, blown film | 64 | ASTM D2457 | |
| 50.0 µm, blown film | 67 | ASTM D2457 | |
| Haze | ASTM D1003 | ||
| 25.0 µm, blown film | 8.0 | % | ASTM D1003 |
| 50.0 µm, blown film | 10 | % | ASTM D1003 |
| Additional Information |
|---|
| Film properties taken from blown film processed at a blow up ratio of 3.5:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PP PPN 2033 | Qenos Pty Ltd | PP Copolymer | Qenos PP |
| TEREZ PMMA 5504 SZ | TER HELL PLASTIC GMBH | Acrylic (PMMA) | TEREZ PMMA |
| Anjacom® 465-GF15 | Almaak International GmbH | PBT+ASA | Anjacom® |
| Luxus TPE 108004 | Luxus Limited | TPE | Luxus TPE |
| LUVOCOM® 1-0865 VP | LEHVOSS Group | Nylon 66 | LUVOCOM® |
