Order Products : sales@su-jiao.com

SILVER® SA-2313

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GgGMw3_SILVER-SA-2313.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA—2000 elastomer is a kind of fully hydrogenated styryl block copolymers, which is of preventing violet and ozone, and is applied for toys and insole by injection molding and extrusion. SA—2000 Elastomer (full-hydrogenated styryl block copolymers) Characteristics: preventing violet and ozone Applications: soft toys, seal ring, frog shoe, frog glasses, mask, strap, antenna coat, bearing, insole, pipe and so on

Message

SlLVER® SA—2000 elastomer is a kind of fully hydrogenated styryl block copolymers, which is of preventing violet and ozone, and is applied for toys and insole by injection molding and extrusion.

SA—2000 Elastomer (full-hydrogenated styryl block copolymers)

Characteristics:

preventing violet and ozone

Applications:

soft toys, seal ring, frog shoe, frog glasses, mask, strap, antenna coat, bearing, insole, pipe and so on

General Information
Uses	Bearings Footwear Piping Seals Strapping Toys
Appearance	Natural Color
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.978	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	9.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	35		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	1.60	MPa	ASTM D638
Tensile Elongation ²(Break)	> 600	%	ASTM D638

Injection	Nominal Value	Unit
Processing (Melt) Temp	160 to 210	°C

Extrusion	Nominal Value	Unit
Melt Temperature	160 to 210	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
REXtac® APAO RT 3535	Huntsman Corporation	PAO	REXtac® APAO
AKROMID® A3 GF 13 S3 black (3768)	AKRO-PLASTIC GmbH	Nylon 66	AKROMID®
Hapflex™ 580 FR	Hapco Inc.	TP, Unspecified	Hapflex™
Hipolyene 6251 Y M4	Zylog Plastalloys	TPO (POE)	Hipolyene
Sylvin 8205-70UV Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin