Order Products : sales@su-jiao.com
NEOPLAST 145 FT EB
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | NEOPLAST |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GgBBuX_NEOPLAST-145-FT-EB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Neoplast 145 FT EB is a soft, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Moulding and Extrusion applications. Key Features: Excellent Ozone resistance, Good Flex fatigue, RoHS Compliant, UV Stabilised |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec, 23°C) | 47 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.16 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 3.14 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 330 | % | ASTM D412 |
| Tear Strength 4 | 10.8 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 15 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | -20 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (150°C, 168 hr) | -25 | % | ASTM D573 |
| Change in Durometer Hardness in Air (150°C, 168 hr) | 2.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -62.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mineralblend® PP-1450 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP Copolymer | Mineralblend® |
| FORMULA P ELAN 6003 UV | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| Grilon® TSM-30/2 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| Kumho EP HAC 8250W | Korea Kumho Petrochemical Co., Ltd. | PC+ABS | Kumho EP |
| Iupiace® GN30 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
