Order Products : sales@su-jiao.com
Lion Idemitsu Composites PPS G131Z1
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Lion Idemitsu Composites Co., Ltd. |
| Trademark: | Lion Idemitsu Composites PPS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GfWUuN_Lion-Idemitsu-Composites-PPS-G131Z1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lion Idemitsu Composites PPS G131Z1 is a polyphenylene sulfide (PPS) product, which contains 70% glass \minerals. It is available in the Asia-Pacific region. The main characteristics are: conductivity. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.95 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Vertical flow direction | 0.20 | % | ISO 294-4 |
| Flow direction | 0.10 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | > 0.020 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ISO 2039-2 | ||
| M scale | 67 | ISO 2039-2 | |
| R scale | 107 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 0.20 | % | ISO 527-2 |
| Flexural Modulus | 31400 | MPa | ISO 178 |
| Flexural Stress | 134 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 7.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 288 | °C | ISO 75-2/A |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow | 6.0E-6 | cm/cm/°C | ISO 11359-2 |
| Lateral | 1.3E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (1.00 mm) | 45 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.90 | IEC 60250 | |
| Dissipation Factor | 1.2E-3 | IEC 60250 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flowability 2(1.00 mm) | 7.00 | cm | Internal method |
| Note Message | |
|---|---|
| 1 . | Internal Method |
| 2 . | Thickness 1mm, Cylinder temperature 320°C, Injection pressure 100MPa, Mold temperature 135°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1200 T-70A Z NATURAL | RTP Company | TPU-Polyether | RTP |
| RTP 603 TFE 13 SI 2 | RTP Company | ABS | RTP |
| SureSpec IP-200N | Genesis Polymers | PP Impact Copolymer | SureSpec |
| Norfor® 130 GF/30-V0 GRIGIO 7110 | SO.F.TER. SPA | PPE | Norfor® |
| apilon 52c® C 60 | API SpA | TPU-Polyester | apilon 52c® |
