Order Products : sales@su-jiao.com
Firestone CR212-203D
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Firestone Textiles Company |
| Trademark: | Firestone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GeL1ax_Firestone-CR212-203D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Firestone CR212-203D is a polyamide 6 (nylon 6) material,. This product is available in North America and is processed by extrusion or injection molding. The main features of the Firestone CR212-203D are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.080 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 79.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Flexural Modulus | 2590 | MPa | ASTM D790 |
| Flexural Strength | 96.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 180 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 65.0 | °C | ASTM D648 |
| Melting Temperature | 220 | °C |
| Additional Information |
|---|
| Relative Viscosity, Test Method Unspecified:Sulfuric Acid: 2.60Formic Acid: 46ModifiedChip Size: 2 x 3 mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.20 | % | |
| Cylinder Zone 1 Temp. | 249 - 260 | °C | |
| Cylinder Zone 3 Temp. | 254 - 266 | °C | |
| Cylinder Zone 4 Temp. | 254 - 266 | °C | |
| Cylinder Zone 5 Temp. | 260 - 271 | °C | |
| Melt Temperature | 260 - 271 | °C |
| Extrusion instructions |
|---|
| Max Melt Temp: 515 - 550°FQuench: 65 - 75°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 2700-75A | RTP Company | TES | RTP |
| Trexprene® A88BW-HF | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| Mylar® S (92 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Nitrovin™ 456 | Vi-Chem Corporation | TPV | Nitrovin™ |
| Bergamid™ A700 G30 H BLUE RAL 5013 (F1) | PolyOne Corporation | Nylon 66 | Bergamid™ |
