Monprene® CP-32054G CLR Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene CP-32054G CLR is a very soft clear thermoplastic elastomer gel designed for a variety of consumer product applications. Monprene CP-32054G CLR is a low density, high flow, high elasticity grade that is suitable for injection molding or extrusion.

General Information
Features	Low Specific Gravity Without Fillers Low density High elasticity High liquidity Transparent appearance Hardness, low
Uses	Safety equipment Handle Sporting goods Stationery Consumer goods application field Footwear
RoHS Compliance	RoHS compliance
Appearance	Clear/transparent Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.878	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (150°C/2.16 kg)	27	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	8	ASTM D2240
Shao's OO, 1 second, injection molding	58	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	0.414	MPa	ASTM D412
Tensile Strength (Break)	2.76	MPa	ASTM D412
Tensile Elongation (Break)	700	%	ASTM D412

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	127 - 160	°C
Middle Temperature	149 - 171	°C
Front Temperature	160 - 182	°C
Nozzle Temperature	171 - 193	°C
Processing (Melt) Temp	171 - 193	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Slow-Moderate
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	127 - 160	°C
Cylinder Zone 2 Temp.	149 - 171	°C
Cylinder Zone 3 Temp.	160 - 193	°C
Cylinder Zone 5 Temp.	171 - 193	°C
Die Temperature	171 - 193	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GdtoNh_MonpreneCP32054GCLR.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Vinnolit® E 70 CQ	Vinnolit GmbH & Co. KG	PVC Homopolymer	Vinnolit®
Niche PPCT20BK	Niche Polymer, LLC	PP Copolymer	Niche
Braskem PP HP529J	Braskem	PP Homopolymer	Braskem PP
Lotryl® 35BA320	Arkema	EBA	Lotryl®
MAJORIS FN000 - 7576FNUT	AD majoris	PP Homopolymer	MAJORIS