Order Products : sales@su-jiao.com
RTP 685 FR HEC
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GcuPPx_RTP-685-FR-HEC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18mm, injection molding | 0.10 | % | ASTM D955 |
| 6.35mm, injection molding | 0.20 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.16 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 10300 | MPa | ASTM D638 |
| Tensile Strength | 52.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 9650 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 79.0 | MPa | ASTM D790 |
| Compressive Strength | 55.0 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 64 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 210 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 116 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 110 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 - 232 | °C | |
| Middle Temperature | 199 - 232 | °C | |
| Front Temperature | 199 - 232 | °C | |
| Mold Temperature | 63.0 - 85.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TYNEC® CG100 | Tyne Plastics LLC. | PC | TYNEC® |
| XYRON™ X351V | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| Grilamid® L 25 nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Halene P M312 | Haldia Petrochemicals Ltd. | PP Impact Copolymer | Halene P |
| GS Pla® AZ91T | Mitsubishi Chemical Performance Polymers, Inc. | Biodeg Polymers | GS Pla® |
