Order Products : sales@su-jiao.com

SMASH!® Plastic

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Smooth-On, Inc
Trademark:	SMASH!®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GbsUt8_SMASH-Plastic.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SMASH!® Plastic is a new urethane liquid plastic designed to shatter/crumble on impact ("breakaway glass"). SMASH!® is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions. Maximum recommended thickness is 1/8" (0.33 cm.). SMASH!® is a room temperature cure system that is easy to use - mixed 1A:1B by volume (1 cup + 1 cup). Low viscosity ensures easy mixing and pouring. Cured castings are UV RESISTANT. Vibrant colors and color effects are achieved by adding pigment dispersions.

Message

SMASH!® Plastic is a new urethane liquid plastic designed to shatter/crumble on impact ("breakaway glass"). SMASH!® is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions. Maximum recommended thickness is 1/8" (0.33 cm.). SMASH!® is a room temperature cure system that is easy to use - mixed 1A:1B by volume (1 cup + 1 cup). Low viscosity ensures easy mixing and pouring. Cured castings are UV RESISTANT. Vibrant colors and color effects are achieved by adding pigment dispersions.

General Information
Features	Good Colorability Good UV Resistance Low Viscosity
Appearance	Clear/Transparent
Forms	Liquid
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.03	g/cm³	ASTM D1475
Specific Volume	0.965	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	1A:1B by volume

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	0.010	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	80		ASTM D2240

Thermoset	Nominal Value	Unit	Test Method
Pot Life	5.0	min
Thermoset Mix Viscosity	900	cP	ASTM D2393
Demold Time (23°C)	90	min

Resin Grade	Manufacturer	Category	Trademark
ResMart ABS VH-0800 Black	ResMart	ABS	ResMart
BESTNYL SI15VI01BH16	Triesa Plastics	Nylon 6	BESTNYL
Flontech® FT-1-2	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
KOCETAL® LF701	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
MAJ'ECO FT150BS - 1199	AD majoris	Biodeg Polymers	MAJ'ECO