Order Products : sales@su-jiao.com
SCANAMID 6 B12^ F15
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Polykemi AB |
| Trademark: | SCANAMID 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GbGBmi_SCANAMID-6-B12-F15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass fibre-reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.23 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 0.90 | -- | % | |
| Flow | 0.30 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 79 | -- | ASTM D2240 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress | 130 | 75.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.5 | 6.5 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 5000 | 3400 | MPa | ISO 178 |
| Flexural Stress | 190 | 105 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | |||
| -20°C | 6.0 | -- | kJ/m² | |
| 23°C | 6.0 | 11 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature 1 | ||||
| 0.45 MPa, Unannealed | 215 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 200 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | > 200 | -- | °C | ISO 306/B50 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 650 | -- | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RX® 3-2-520F-P | Sumitomo Bakelite North America, Inc. | DAP | RX® |
| Shinko-Lac® ASA TA-15L | Mitsubishi Rayon America Inc. | ASA+PC | Shinko-Lac® |
| Wondel® C CR0 | Nanjing Julong Engineering Plastics Co., LTD | PC | Wondel® C |
| Formolene® E925 | Formosa Plastics Corporation, U.S.A. | HDPE, HMW | Formolene® |
| Optix® CP-927HF | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
