Order Products : sales@su-jiao.com
KMI PP KM573-MJ
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gap1NE_KMIPPKM573MJ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KM573-MJ is a high impact block copolymer which has high ethylene-propylene rubber content. This grade is designed to be processed in conventional injection molding equipment. It should a high melt flow, controlled rheology and has a good balance of strength, impact resistance and proccessability. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 45 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | % | ASTM D638 |
| Flexural Modulus | 1470 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 74 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 125 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Romiloy® 1015/01 F | ROMIRA GmbH | PC+ABS | Romiloy® |
| Unigel PS U285 | Unigel Plásticos | PS (GPPS) | Unigel PS |
| APEX® 3200-60NT | Teknor Apex Company | PVC, Flexible | APEX® |
| KumhoSunny PMMA/ABS 722 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS+Acrylic | KumhoSunny PMMA/ABS |
| Hy-Vin® XJ80408 | INEOS Compounds | PVC, Flexible | Hy-Vin® |
