Order Products : sales@su-jiao.com
Retpol® 3053 HS UV3
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Retpol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GZnDkM_Retpol-3053-HS-UV3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Extron 3053 HS UV3 is a 23% glass fibre reinforced coupled polypropylene compound. It is a high flow injection moulding grade developed for components requiring excellent creep resistance with high rigidity, high heat deflection temperatures and good impact strength. It is stabilized for continuous outdoor exposure and to meet automotive heat ageing requirements of 500hrs at 150°C. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.20 to 0.80 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.00 mm) | 111 | ASTM D785 | |
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 3.00 mm | 81 | ||
| Shore D, 15 sec, 3.00 mm | 76 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(3.00 mm) | 88.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.00 mm) | 2.0 | % | ASTM D638 |
| Flexural Modulus (3.00 mm) | 4500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.00 mm) | 90 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.00 mm) | 600 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.00 mm | 160 | °C | |
| 1.8 MPa, Unannealed, 3.00 mm | 150 | °C | |
| CLTE - Flow (-30 to 30°C, 3.00 mm) | 4.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 to 120 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Regrind | 10 | % | |
| Processing (Melt) Temp | 200 to 260 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® HI 0802 | Plastic Solutions, Inc. | PS (HIPS) | PrimaFlex® |
| Melinex® S | DuPont Teijin Films U.S. | Polyester, TP | Melinex® |
| Borealis PP SR533 | Borealis AG | PP, Unspecified | Borealis PP |
| HiFill® PA6/6 GF33 IM HS L BK001 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| OnFlex™ S KA 80A-3S1770 | PolyOne Corporation | TPE | OnFlex™ |
