Order Products : sales@su-jiao.com
SABIC® LLDPE 318CN
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GYcHuZ_SABIC-LLDPE-318CN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description 318CN is Linear Low Density Polyethylene natural resin designed for wire and cable applications. It contains low level of antioxidants and does not contain any slip and antiblock additives. Sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Typical Applications One-step or two-step Silane cross-linkable insulation for Low Voltage power insulation cable, Aerial bundle cable and is also suitable for telecommunication and Low Voltage power cable jacketing. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant | 174 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 10.0 | MPa | |
| Break, Injection Molded | 18.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, Injection Molded | 17 | % | |
| Break, Injection Molded | 560 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 120 | °C | Internal Method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 1 | 6.8E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength 2 | 37 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 2.25 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 7.0E-4 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 500V |
| 2 . | 1000 V/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2585 FR | RTP Company | PC+ABS | RTP |
| RenPIM® VG 5281 Polyol/ 5281 Isocyanate | Huntsman Advanced Materials | PUR, Unspecified | RenPIM® |
| Quadrant EPP CESTIFLAME PE-UHMW | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| SAXAMID™ 226F5RY01 | SAX Polymers | Nylon 66 | SAXAMID™ |
| FHR Polypropylene P4G4K-205 | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
