Order Products : sales@su-jiao.com

Qenos PE HD0490

Category:	HDPE , High Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GX3UR0_Qenos-PE-HD0490.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HD0490 is an injection moulding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness. HD0490 is intended for use in the production of stackable transport, storage and bottle crates and industrial mouldings demanding very good mechanical properties. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing. HD0490 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

Message

HD0490 is an injection moulding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

HD0490 is intended for use in the production of stackable transport, storage and bottle crates and industrial mouldings demanding very good mechanical properties. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

HD0490 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

General Information
Features	Food Contact Acceptable Good Impact Resistance High Hardness High Stiffness Ultra High Toughness
Uses	Crates Industrial Applications
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.955	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.5	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	46.0	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	30.0	MPa	ASTM D638
Flexural Modulus	1100	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	45	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
Toppyl SP 2001 B	LyondellBasell Industries	Polyolefin, Unspecified	Toppyl
ALTECH® PC C 1000/578	ALBIS PLASTIC GmbH	PC	ALTECH® PC
Fainplast PVC GS 89/T	Fainplast Compounds S.r.l	PVC, Unspecified	Fainplast PVC
Generic PPSU	Generic	PPSU	Generic
Sylvin 9302-75 FU WHITE 1279	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin