Order Products : sales@su-jiao.com
Akulon® CO-KGV4 /A JN.00.86
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Akulon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GWukgE_Akulon-CO-KGV4-A-JN-00-86.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Akulon® CO-KGV4 /A JN.00.86 is a Polyamide 6 (Nylon 6) material filled with 20% glass fiber. It is available in Europe. Important attributes of Akulon® CO-KGV4 /A JN.00.86 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.34 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.1 | -- | % | |
| Flow | 1.1 | -- | % | |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 6.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.0 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 4800 | -- | MPa | ISO 527-2 |
| Tensile Stress (Break) | 63.0 | -- | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | -- | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.0 | -- | kJ/m² | ISO 179/1eA |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature 1 | 220 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Electric Strength | 30 | 25 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | |||
| 100 Hz | 4.30 | 10.0 | ||
| 1 MHz | 3.80 | 3.90 | ||
| Dissipation Factor | IEC 60250 | |||
| 100 Hz | 0.013 | 0.30 | ||
| 1 MHz | 0.021 | 0.10 | ||
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification | IEC 60695-11-10, -20 | |||
| 0.800 mm | V-2 | -- | ||
| 1.60 mm | V-2 | -- | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 0.800 mm | 960 | -- | °C | |
| 1.60 mm | 960 | -- | °C | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 0.800 mm | 725 | -- | °C | |
| 1.60 mm | 725 | -- | °C |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® AESN EP 076 TL | Arkema | Nylon 12 | Rilsan® |
| EZPrene 9035A | ENPLAST Americas, a Ravago Group Company | TPV | EZPrene |
| HiFill® PA6/6 GF25 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| KPOL-HDPE HD K-0.35/955 | KPOL Chem Co. | HDPE | KPOL-HDPE |
| Plasmer 1370B/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
