Order Products : sales@su-jiao.com
BAAF UHMW-PE M-2
| Category: | HDPE, UHMW , High Density (UHMW) Polyethylene |
| Manufacturer: | BAAF |
| Trademark: | BAAF UHMW-PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GVGO19_BAAF-UHMW-PE-M-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BAAF UHMW-PE M-2 is a High Density (UHMW) Polyethylene material. It is available in Asia Pacific or Europe. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 to 0.940 | g/cm³ | Internal Method |
| Apparent Density | Internal Method | ||
| -- 1 | > 0.35 | g/cm³ | |
| -- 2 | > 0.38 | g/cm³ | |
| Molecular Weight | 2000000 to 3000000 | Internal Method | |
| Particle Size 3 | > 98.0 | % | Internal Method |
| Volatile Matter | < 0.15 | wt% | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | Internal Method | ||
| Break 4 | > 32.0 | MPa | |
| Break 5 | > 34.0 | MPa | |
| Tensile Strain | Internal Method | ||
| Break 6 | 300 | % | |
| Break 7 | 350 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | Internal Method | ||
| -- 8 | > 95 | kJ/m² | |
| -- 9 | > 130 | kJ/m² | |
| Unnotched Izod Impact Strength 10 | No Break | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | > 80.0 | °C | Internal Method |
| Note Message | |
|---|---|
| 1 . | M-1 B |
| 2 . | M-1 A |
| 3 . | through 20 mesh sieve |
| 4 . | M-1 B |
| 5 . | M-1 A |
| 6 . | M-1 B |
| 7 . | M-1 A |
| 8 . | M-1 B |
| 9 . | M-1 A |
| 10 . | M-1 B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BZM 8 TL | Arkema | Nylon 11 | Rilsan® |
| Adell Polyamide BT-37 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Jiangsu Sinarise PX901X | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| Polygen SG8D-BK | Shanghai Polygen Science and Technology Co., Ltd. | PPS | Polygen |
| OTECH PVC OM8432-Molding | OTECH Corporation | PVC, Unspecified | OTECH PVC |
